Cream of the Crop 11/Cream of the Crop 11-1.iso/educate/numer105.zip/NUMERO.DOC

Text File | 1994-11-15 | 101KB | 2,724 lines

                N  U  M  E    R  O     U  N  O



                T h e   P r o g r a m   F o r

             N u m e r o l o g i c a l     A n a l y s i s





                 For IBM PC and Compatibles



                     User Manual



              Effective Date: November 15, 1994





           (C) Copyright 1992-1993 By Christopher J. Noyes






              T A B L E   O F   C O N T E N T S


            License For Use.............................4
            Warranty....................................4
            Support.....................................4
            New to Numerology?..........................5
            Introduction to NUMERO UNO..................6
            System Requirements.........................8
            Conventions used in this Manual.............9
            Installing NUMERO UNO......................10
            Starting Up NUMERO UNO.....................14
            Command Line Options.......................17
            Using Screens and Menus....................18
            Using Macros...............................24
            Entering and Editing Data..................26
            Compiling Reports..........................29
            Viewing and Printing the Results...........31
            NUMERO UNO Utilities.......................38
            Using Options..............................40
            Modifying the Text Source..................49
            Handling Errors............................52
            Table of Numerological Vibrations..........55
            Glossary of Numerological Terms............57
            Glossary of Computer Terms.................60
            Bibliography...............................63























                       Page 2






                L I C E N S E   F O R   U S E

         You have the right to use this package on any one computer at
      a given time. You may copy this package for installation,
      archival or for backup purposes only. This is copy-righted
      software, you may not give copies of it to anyone without my
      written permission. You may, though, provide other people with
      copies of the shareware trial package, that you probably used
      before you bought this software.
         This does not give you the right to market charts produced
      with this program without my permission. If you use these charts
      as a part of a professional Numerology consulting service, there
      are no restrictions in charging for services.

                   Thanks



                   Christopher J. Noyes



                   W A R R A N T Y

         If I cannot to resolve any problems you have with NUMERO UNO
      I will refund your money. You must  return this manual and all
      disks and this manual that I shipped you when you registered.
         While I have made every attempt to assure that NUMERO UNO
      works properly, I am not  responsible for any damage, loss of
      profit, or other losses caused by NUMERO UNO.


      This program is produced by a member of the Association of
      Shareware Professionals (ASP). ASP wants to make sure that
      the shareware principle works for you. If you are unable to
      resolve a shareware-related problem with an ASP member by
      contacting the member directly, ASP may be able to help.
      The ASP Ombudsman can help you resolve a dispute or problem
      with an ASP member, but does not provide technical support for
      members' products.  Please write to the ASP Ombudsman at 545
      Grover Road, Muskegon, MI USA 49442-9427, Fax [phone],
      or send a CompuServe message via CompuServe Mail to ASP
      Ombudsman 70007,3536.





                       Page 3







                    S U P P O R T

         If you did not purchase NUMERO UNO directly from Me, I
      suggest first trying to get support from the company you bought
      NUMERO UNO from. If they are unable to solve your problem, I will
      be happy to help you.
         For technical support on NUMERO UNO:
      * Call me at [phone] between the hours of 10:30 A.M. and
        4:30 P.M. (EST), any day. If I am not available, please leave a
        message, I will call you back as soon as I can.
      * Contact me on Compuserve Mail using the ID 71570,3055.
      * Contact me on America On-Line using the ID CJNoyesSW.
      * Contact me on The Internet using [e-mail] or
        [e-mail].
      * Contact me on ILINK bulletin board systems using the name
        Chris  Noyes.
      * FAX Me At [phone].
      * Contact me by Mail at the address below.

                   CHRISTOPHER J. NOYES SOFTWARE
                   144 Union Street--Store A
                   Brooklyn, NY 11231.


























                       Page 4






             N E W     T O   N U M E R O L O G Y ?

         To get the most out of this program you need some
      understanding of astrology.
         A Glossary of Numerology terms is in the back of this manual.
      You might also want to do some background reading. I suggest the
      following books:


      YOUR DAYS ARE NUMBERED, A MANUAL OF NUMEROLOGY FOR EVERYBODY. by
           Florence  Campbell, M.A.,  Published by DeVors Publications,
           Marina del Rey, CA,  1931, 1958.
      NUMEROLOGY, THE ROMANCE IN YOUR NAME. by Jordan, Juno, Published
           by DeVors Publications , Marina del Rey, CA,  1965, 1988,
           1978, 1989.

      IT'S ALL IN YOUR NUMBERS, THE SECRETS OF NUMEROLOGY. by Kathleen
           Roquemore, Published by Perennial Library, Harper & Row
           Publishers, New York, 1965.






























                       Page 5






         I N T R O D U C T I O N   T O     N U M E R O   U N O

      WHAT IS NUMEROLOGY?           Christopher John Noyes on March
      Numerology is the science of       29, 1958. for those people
      numbers. In Numerology, each       Astrologically inclined. I
      number has a vibration, or       was born on March 29, 1958 at
      feeling to it. Each letter in    approximately 3:45 am in Peter-
      the alphabet has a vibration       borough N.H.
      relating to a number. By
      analyzing the numbers in your    CAVEAT.
      birth date in combination with   I have one major reservation in
      those of your name, you can       the publication of this
      analyze yourself.           program. In doing  research on
      AUTHOR'S BACKGROUND.             Numerology, I have found
      I initially started programming  conflicts between authors,
      in 1985 using a Commodore 128    terminology and schools of
      computer. I got started writing  thought. This program may use a
      astrology software, just as a    Numerology term differently
      challenge to myself. For lack    than you may use it.
      of good tools started            If you have any questions
      programming on the IBM PC and    on the definitions of terms,
      compatibles.               please refer to the Glossary of
         I wrote the Astrology       Numerology Terms in the back of
      program ASTRO. Those who are       this manual.
      familiar with ASTRO will find
      NUMERO UNO or Numero for Short,  SOFTWARE CAPABILITIES.
      easy to use as it uses the same  NUMERO produces several types
      user interface as ASTRO. I like  of reports. With each report,
      to product software that is       you can:
      both easy to use, reliable and   * View the report.
      fun. I think you will find that  * Print the report.
      NUMERO has all these           * Convert it to a file for use
      attributes.                 with your word processer.

      WHY THE NAME.            NUMERO also has two interactive
      I call the program Numero Uno,   calendar screens so you can see
      because my Destiny or Birth       the numerological influences of
      Path number is a 1. The       any day in a  month and year.
      expression number based on the
      name I use most now Christopher  NUMERO PRODUCES
      J. Noyes is also a Number 1. It  * A Personality Report that
      also makes sense with my Aries     analyzes your birth date and
      Sun Sign.                 names and interprets the
                         results.
      ABOUT THE AUTHOR.           * A Numeric Personality Report,
      In case you are interested in      which analyzes the data, but
      analyzing me, I was born         does not interpret it.


                       Page 6





      * An interpreted Transit report  date, so is more or less
       which analyzes the effects of   unique, but a Universal
       each number on each year of       Calendar for a given month will
       your life.               be the same regardless of birth
      * A Numeric Transit report,       date.
       similar to the above, but           These calendars are
       with no interpretations.       presented in an attractive
      * Personal Calendars.        readable format, and can take
      * Universal Calendars.       advantage of 24 pin and laser
                       printer advanced features.
         NUMERO Calculates the           Interactive Calendars are
      following numbers in doing it's  also provided. Using the
      analysis of your birth date:       Interactive calendar, you can
      * Destiny Number or Birth Path.  scroll through months, looking
      * Sun Sign.               at specific days, to see the
      * Challenges.            effect of each day and see how
      * Life Cycles.           they relate to you. These
      * Pinacles or Turning Points.    displays use popup screens to
                       show, the text related to each
         NUMERO Calculates the       day,  and year.
      following numbers in doing it's      Users who are knowledgeable
      analysis of your birth and       in Numerology can replace the
      current name:            text to customize the reports
      * Expression.            to reflect your knowledge and
      * Motivation.            point of view.
      * Inner Self.                NUMERO UNO supports all
      * Karmic Lessons.           major printer types and can
      * Listings of elements.       take advantage of many features
      * Listing of Planes of       such as fonts and color.
       Expression.                   You can convert the reports
      * Listing of Numbers.        into word processing files
      * Essence Numbers in Transit       which can be easily imported
       Reports.               into most word processors.
                           You can save data from the
         You can also generate       program to a file so that it
      personal and universal       can be used at a later time, so
      calendars for any range of       you don't have to retype the
      months. A personal calendar is   information.
      directly related to your birth











                       Page 7






            S Y S T E M   R E Q U I R E M E N T S
              T O    R U N    N U M E R O   U N O

      Though NUMERO UNO is a flexible system and can be run on a number
      of different type of systems, it does have some hardware
      requirements.

      COMPUTER AND DOS.           Video.
      NUMERO requires at least an           NUMERO UNO is compatible
      IBM-PC (or at least a close       with most graphics adapter
      compatible or BIOS Compatible    cards.
      computer) running either MS-DOS
      or PC-DOS version 3.0 or later.  PRINTER.
                       NUMERO UNO directly supports
      MEMORY.               many different printers, as
      NUMERO works best on a system    most printers are compatible
      with 640k of memory, though it   with either the Epson/IBM dot
      can run on a system with as       matrix printer standard, or are
      little as 512k. If LIM/EMS       compatible with the Hewlett
      expanded memory or extended       Packard PCL Standard.
      memory, NUMERO will use  it to       NUMERO UNO supports both 9
      run faster.               and 24 pin Epson/IBM compatible
         NUMERO will work well with    printers, both black and white
      other EMS, and XMS providers       and color.
      with some adjustments that may       NUMERO UNO also supports
      be needed. If NUMERO won't       Hewlett Packard LaserJet,
      start due to an extended memory  DeskJet, PaintJet  and
      problem, you will need to       compatible printers, as well as
      manually allocate 75-100k of       the Canon Laser printers.
      XMS by making adjustments to           Other printers are
      your memory provider's command   indirectly supported, by the
      line.                user typing in codes into data
                       screens or the graphics setup
      DISK SETUP.               file.
      NUMERO, does not require a hard      This version supports  many
      disk, but will run better on a   advanced printing features such
      system with a hard disk. Numero  as color and multiple fonts.
      Uno on floppies requires one
      1.44MB 3-1/2", one 1.2MB 5-1/2"
      or two 720kb 3-1/4" diskettes.









                       Page 8






        C O N V E N T I O N S   U S E D   I N   T H I S   M A N U A L

      This section describes the conventions that are used in this
      manual.

      ALL CAPS.................System command, or command line  to type
                   at the DOS Command Line.
      A:.......................Disk Drive Letter, or other Device.
      A:\<Directory Name>\<File>    Path Name.
      .........................Previous Directory
      .........................Current Directory
      \<Directory Name>\<File>.Path Name, beginning at root directory,
                   or start of current disk drive.
      FILENAME.EXT.............A file name can consist of up to eight
                   letters, a '.' and a three letter
                   extension.
      'Key Name' ..............A Key on the keyboard to press.
      {ALT}....................Hold Down the ALT key on your keyboard.
      {CNTL}...................Hold Down the CNTL or  Control key on
                   your keyboard.
      {SHIFT}..................Hold Down the Shift key on your
                   keyboard.
      {Fn}.....................A Function Key for example {F1} means
                   press the F1 key at the Top or Left of
                   your keyboard.
      {ALT}+'A'................Hold Down the ALT key, and press the 'A'
                   key on your keyboard.






















                       Page 9






              I N S T A L L I N G   N U M E R O   U N O

      Most people will probably be able to run the install program and
      go. But, If you wish to, you can easily change the configuration
      using the setup screen in the options menu.

                 I M P O R T A N T !
      YOU MUST RUN THE INSTALL       FILES=20 and no more. The two
      PROGRAM.               values should be considered
      Before you start using NUMERO    minimum. On most systems you
      UNO, make backup copies so the   may be able to use more, though
      original master diskettes are    check your DOS manual just to
      not destroyed or harmed. This    be sure. If you are in the main
      way you can make additional       directory on your startup disk
      copies if the original is       you can see the CONFIG.SYS file
      damaged.               by typing TYPE CONFIG.SYS
         This is particularly       {ENTER}.
      important to floppy disk users,
      though hard disk users will       FLOPPY DISK BASICS.
      probably want to make a backup   Floppy disks come in several
      as well, and put the original    different varieties, so it is
      away in a safe place after       important to buy the right type
      copying the master diskettes to  for your computer, though the
      your hard disk.           brand doesn't really matter as
         You should check to see       long as you buy a high quality
      that your CONFIG.SYS file has    diskette. You should usually
      the two entries FILES= and       buy "Double Sided" diskettes.
      BUFFERS= in it. This file is       Single sided diskettes are
      usually found in your root       actually two sided, but the
      directory or your startup       second side has not been
      floppy disk.               tested.
         This file can be edited           Before any of the following
      with any editor that will edit   operations, make sure the
      and produce a straight ASCII       diskette is securely in the
      file.                drive before closing the latch.
         You should have a line in       The label on the disk should be
      the CONFIG. SYS has the entry    facing up when you insert the
      FILES=12 and BUFFERS=10. The       disk in the drive.
      numbers are not important as
      long as you have more than
      these numbers in the file. If
      these are not present in your
      file, you should add them or
      alter them so you have at least
      these values. If you are using
      MS-DOS or PC-DOS 2.1 or less
      you will only be able to set


                       Page 10





      -------------------------------  all the files on this disk to a
      IMPORTANT: Handle floppy disks   different type of disk
      with care, they are easily           The general format for the
      damaged. Never write on a       copy command is COPY source
      floppy disk with a ball point    [destination] {ENTER}, where
      pen as that can damage the       source and destination are the
      disk. Keep the disk away from    source diskette and file name,
      magnetic fields such a TV sets,  and destination is the
      motors and telephones, as the    destination diskette or disk
      disk may be erased by them. Do   drive and path. Destination is
      not put your finger on the disk  optional. For example if you
      area itself and keep cigarettes  are    using the A: drive and
      and food away from your disks.   want to copy the file
      Disk Formatting.           MYCHART.TXT from the B: drive
      Disk formatting initializes a    to the A: drive you would type
      blank disk ready for use by       one of the following examples.
      your computer.           * COPY B:MYCHART.TXT {ENTER}.
      -------------------------------  * COPY B:MYCHART.TXT A:
         To format a floppy disk: At     {ENTER}.
      the DOS prompt ("A>" or any       * COPY B:MYCHART.TXT
      other letter followed by the         A:MYCHART.TXT {ENTER}.
      '>' mark. type FORMAT        All of the three would be
      A:{ENTER}.               equivalent. If you want to
                       change the name of the
      DISK COPYING.            destination file, you would use
      Copying a disk will make an       the third example.
      exact copy of a floppy disk.           If you wanted to copy all
         To copy a disk: At the DOS    the files on one diskette to
      prompt with the disk in the       another you would type COPY
      drive, type DISKCOPY A: B:       A:*.* B:  {ENTER}.
      {ENTER}. This command works           If you wanted to copy all
      even if you only have one       the files on one diskette with
      floppy disk, as DOS simulates    the .EXE extension to another
      the use of two disks by using    you would type COPY A:*.EXE B:
      swapping. DISKCOPY will tell       {ENTER}.
      you to put the source or master      If you wanted to copy all
      disk into the A: drive and the   the files on one diskette that
      destination disk into the B:       begin with the letter 'H',  to
      drive. If you only have one       another  you would type COPY
      drive, the system will tell you  A:H*.* B:  {ENTER}.
      when to swap.            INSTALLING.
                       If your system does not have a
      FILE COPYING.            Hard Disk, see the below table
      Copying files allows you to       to see the number of disks
      duplicate  one file (or a few    required.
      like named files)  on a disk.
      You can also use COPY  to copy



                       Page 11





      -------------------------------  have to choose between two
               NUMBER       different installation
              OF DISKS       approaches. The first, "Install
      DISK SIZE        NEEDED       in One Directory" is simpler
      1.2MB 5-1/2" or                  and is suggested.
      1.44MB 3-1/4".......1                The install program will
      720k 3/"............2            also ask you if you want to
      -------------------------------  install the "Text Source and
         If you are installing       Compilers". If You did not
      NUMERO on floppy disks,  label   receive a disk marked "Text
      the disks exactly as the       Source and Compilers", don't
      install program tells you to.    answer Yes. This optional item
         If you received the "Text     allows you to customize the
      Source Files and Compilers"      text. You can purchase this
      package with this program, you   later and install it
      will need 1 more diskette.       separately.
         Backup both the original           The install program asks
      master disks, particularly if    you if you want to install the
      you are using floppy disks.       Documentation. This is an on-
         If you had the shareware       line version of this manual.
      version of NUMERO, or an       -------------------------------
      earlier version of NUMERO on       NOTE: If another company's
      that disk or directory delete    install program starts up, it
      the setup data files by typing   is usally because you don't
      ERASE N1SYS.DAT {ENTER}.       have the right disk in the
      .  Insert the disk marked       drive you specified when you
      "NUMERO UNO Main Program Disk"   typed install, or you haven't
      into your disk drive.        logged onto the drive before
         If you inserted the disk       typing INSTALL.
      into your A: Drive you can       -------------------------------
      either log onto that drive by        If you don't use a Hard
      typing A:, and then typing       Disk or you don't have a
      INSTALL{ENTER}, and following    CONFIG.SYS file, NUMERO will
      the instructions. You can also   remind you to create one or
      type A:INSTALL{ENTER}.       make sure the FILES= and
         If you inserted the disk       BUFFERS= are present in the
      into your B: Drive you can       file.
      either log onto that drive by        The Install program will
      typing B:, and then typing       tell you when the installation
      INSTALL{ENTER}, and following    is complete.
      the instructions. You can also
      type B:INSTALL{ENTER}.
         The install program asks
      you what type of system you
      want to install NUMERO on.
         If you are installing
      NUMERO on a system with a hard
      disk, choose 4. You will also


                       Page 12





      VIDEO ADAPTER/MONITOR AND COLOR
      CONFIGURATION.
      When NUMERO starts up, t auto-
      matically configures itself for
      the type of video adapter and
      monitor configuration you are
      using. It also sets the screen
      colors to appropriate default
      values.
         NUMERO automatically sets
      itself up to use a fast RAM
      video driver that updates the
      screen in the fastest way
      possible.




































                       Page 13






             S T A R T I N G   U P   N U M E R O   U N O

      You are now ready to start using NUMERO UNO. When you start
      NUMERO, you need to be logged into the disk and in the directory
      where the NUMERO.EXE file is stored, or you need to have set the
      DOS PATH variable to that disk and directory. If you are using a
      hard disk and NUMERO is in the C:\NUMERO directory, and you are
      in the C: drive, you can do this by typing CD \NUMERO.
         You would set that        possible. If NUMERO does not
      directory using the command       find these subdirectories, the
      PATH C:\BIN; C:\NUMERO\{ENTER},  setup defaults to the directory
      assuming that your DOS files       where NUMERO is installed.
      are stored in the directory       CUSTOMIZING THE SETUP.
      C:\BIN, and NUMERO is stored in  To view or customize the setup
      the C:\NUMERO directory.       information for your special
         To start NUMERO from the       needs, choose the Setup Screen
      DOS command line prompt type       from the Options sub-menu.
      NUMERO{ENTER} and NUMERO start   Finding Other Important Files.
      up.                   When NUMERO starts up, it will
         Do not  start up NUMERO       attempt to find the help file
      using a command line such as       NUMERO.HLP that is stored ei-
      C:\NUMERO\NUMERO{ENTER} because  ther in the program's data
      NUMERO may not be able to find   directory. If that file can't
      the setup file (N1SYS.DAT) if    be found, NUMERO displays an
      one exists.               error message telling you that
         I suggest typing CD \NUMERO   you can't access the help
      {ENTER} NUMERO{ENTER} to start   system.
      NUMERO assuming NUMERO is in           If you get this error, find
      your NUMERO directory.       where the help files were saved
         For information about       and make sure the Setup Screen
      Startup Options see the section  in the Options sub-menu is set
      marked "Command Line Options".   properly.
                           NUMERO next attempts to
      THE SETUP INFORMATION FILE.       read the list of compiled chart
      If the setup information file,   files from disk into memory.
      called N1SYS.DAT, can't be       This is a list of all the files
      found (NUMERO searches first in  created the last session. It is
      the current directory then the   stored in a file called
      directories pointed to by the    N1FILE.LST which is located on
      DOS PATH variable), NUMERO       the data disk (in a floppy type
      creates it, as it is best able   system) or in the user
      to do from the hardware it       directory (in a hard disk type
      finds.               system). If NUMERO can't find
         When creating the initial       this file, the program assumes
      setup, NUMERO looks for sub-       it was erased,  or never was
      directories called, DATA and       created before.
      USER and uses them when


                       Page 14





         NUMERO then reads the file    CPU which as a math coprocessor
      N1DAT.HIS (if it exists). This   on board, and do not wish to
      is the history file, data that   use it (perhaps because of
      was in the Enter/Edit screens    malfunction or other problem)
      at the time you last quit       you should set the following
      NUMERO.               option before starting up.
         Then NUMERO reads the file        At the DOS command line
      N1DAT.DEF (if it exists). This   type SET NO87=1 {ENTER}.
      is the default data; it is           You can create a batch file
      loaded every time you start       to automatically execute this
      NUMERO. If you want certain       comand and start NUMERO. To
      chart information loaded every   create this batch file, type
      time you start NUMERO, save       the following:
      that information to the file       COPY CON: N1.BAT
      N1DAT.DEF, using the Save Data   ECHO OFF
      To Disk function.           SET NO87=1
         Next,  NUMERO loads a file    NUMERO
      called N1.MAC (if it exists).    ECHO ON
      This is a file of macros. This   {F6} (^Z appears on the screen)
      File Contains the default       Then you would type N1{ENTER}
      macros. If you wish to disable   to start NUMERO.
      these macros, rename this file.
      If you wish to add macros that   -------------------------------
      will be permanent and will load  NOTE: If you have a math
      each time, add them to this       coprocessor and NUMERO freezes
      file. For further information    while compiling a chart, this
      about Macros, see the section    may solve your problem.
      titled "Using Macros" later in   -------------------------------
      this manual.
                       RUNNING NUMERO UNDER WINDOWS.
      USING A MOUSE.           You will find a file called
      NUMERO provides built-in mouse   NUMERO.PIF and an Icon for
      support. In order to use NUMERO  NUMERO in your program
      with a mouse, you must have a    directory. I  suggest that you
      mouse driver loaded in your       give NUMERO 100k - 150k of XMS
      CONFIG.SYS or AUTOEXEC.BAT       memory.
      file. See your Mouse               You may need to modify this
      Documentation for more       .PIF file, to suit the
      information.               directory names that you use.
      8087 Math Coprocessor Chips.
      If your computer has a  8087,
      80287, or 80387,  math
      coprocessor chip or use the 486







                       Page 15






               C O M M A N D   L I N E     O P T I O N S

      This section describes the command line options that you can
      enter when your start NUMERO UNO. You can enter as many command
      line options as you need. Leave a space between NUMERO and each
      command line option. Options begin with either a '/' (forward
      slash) or a '-' (hyphen or minus), and can be typed in capital
      letters or non-capital letters.
         For Example To Start NUMERO with the -LCD option, type NUMERO
      -LCD{ENTER}.
      -BIOS..Starts NUMERO using your       parts of its program.
         computer's BIOS chip for          Use this option if you
         putting the text on the       are having  difficulty
         screen. Slower than           with NUMERO.
         Normal Operation, but       -RKB=f .Causes NUMERO to record
         will work with  certain       all keyboard activity in
         program and certain non-       a file. For f , specify
         standard computers.           the name of the file.
      -LCD...Starts NUMERO using       -PKB=f .Causes NUMERO to read
         colors for Laptop           all keyboard actifvity
         Computers with LCD           from a file f. This file
         screens.  Try this           was recorded using the -
         option if you can't use           RKB option.
         NUMERO's screens and are  -TUT=f . The Same as used by -
         using a laptop type           PKB=, but plays the
         computer.               keyboard activity  back
      -43....If you are using a VGA        slower, making it easier
         or EGA screen, starts           to follow.
         NUMERO using 43 line       -MAC=f .When NUMERO starts up
         screen mode.               the file name following
      -50....If you are using a VGA        the '=' here  signified
         screen, starts NUMERO           by the 'f' is opened and
         using 50 line screen           NUMERO reads keyboard
         mode.                   macros from this file.
      -NOTI..Starts NUMERO without           NOTE: this is in
         displaying the title           addition to the standard
         screen.               macro file NUMERO.MAC.
      -NOCACHE..Causes NUMERO to not       Macros in this file
         use EMS or Extended or        replace the ones defined
         XMS memory to cache           in NUMERO.MAC.









                       Page 16






              U S I N G   S C R E E N S   &   M E N U S

      This section explains NUMERO UNO's user interface. That is, the
      screens and menus that you deal with when you use NUMERO.
         NUMERO's user interface is intuitive and easy-to-use. All the
      menus are logically structured and should be easy to follow.
      Because NUMERO works similarly to other programs used on the IBM
      PC, you need only a little computer experience  to begin using
      NUMERO.

              I M P O R T A N T   I N F O R M A T I O N
      Should you have trouble at any time with NUMERO UNO, there are
      several things that you should remember. The following table
      describes some useful information.
      {F1}.....................Get Help in any menu or data screen.
      {ESC} or {ESCAPE}........Back out of any screen or series of
                   screens to the main menu. Also cancel
                   any entry choice.
      {DOWN}, {TAB}, {ENTER}...Move Down through fields.
      {UP},  {SHIFT}+{TAB} ....Move Up through fields
      {F10}....................Closes screen, and records screen as
                   having been completed.
      {PRINT SCREEN}...........Print screen to printer.
                YES/NO AND LIST TYPE FIELDS:
      {SPACE BAR}..............Toggle Choices in Yes/No Fields, or
                   popup menu in list type field.
      {Y}, {N}.................In Yes/No fields, select Yes or No.
      MOUSE SUPPORT.           -------------------------------
      If you are using a mouse,       NOTE: Do not use a mouse menu
      NUMERO displays a mouse cursor   program.  NUMERO has full mouse
      on the screen. The mouse cursor  support which is easier to use.
      is a rectangular block. When       Exiting a Screen.
      you move the mouse, you will       -------------------------------
      see it move around the screen.   You can exit a screen at any
         If you have more than one       time by pressing the {ESC} key,
      mouse button, you will only use  or moving to the "Cancel"
      the left button. When this       button and clicking the mouse
      manual refers to the "Mouse      on it, or pressing {ENTER}.
      Button", it means the left           This records a screen as
      mouse button.            incomplete and does not
         You must have a mouse       validate and does not do final
      driver loaded before starting    calculations done when pressing
      NUMERO, see information in the   {F10} or pressing {ENTER} on
      previous section for more       the last line of a screen or on
      information on this.           a menu.
                           If you have completed the
                       screen, press the {F10} key or


                       Page 17





      move to the "OK" button and       USING A MOUSE IN A MENU.
      click the mouse or press       In a menu, you can select a
      {ENTER}. This will record the    menu item by pressing the mouse
      screen as being completed.       button. Once you are on that
         Pressing a mouse button       choice and the choice is high-
      while the mouse cursor is       lighted, you can choose a
      outside of the current window    choice by pressing the mouse
      has the same effect as pressing  button. If you are not on a
      {ESC}.               choice, you can move the choice
      {F10}..Close Screen and       around by pressing the button
         Validate Data.        down and moving the mouse. The
      {ESC}..Close Screen,           highlighted choice will follow
         Don't Validate Data.      the mouse.
      OK AND CANCEL BUTTONS.           Select any menu choice in a
      Every dialog box has two fields  menu by pressing the first
      at the bottom which say "OK"       letter of that choice.
      and "Cancel".  Moving to the
      "OK" field, and either click it  USING A MOUSE IN A YES/NO OR
      with the mouse button, or press  SELECTION FIELD.
      {ENTER}, it will have the same   In a Yes/No field, you can
      effect as pressing {F10}. If       toggle a choice from Yes to No,
      you Move to the "Cancel" field   or from No to Yes by clicking
      or button, and either click it   the mouse button on the field.
      with the mouse button anywhere       In a multiple selection
      outside of the current screen    field, click the left mouse
      or menu, or pressing {ENTER},    button. This will A menu of
      it will have the same effect as  choices is displayed. Use the
      pressing {ESC}. You can quickly  mouse as you would in a menu
      move to the "OK" field or       screen.
      "Button" by pressing {ALT}+'O'.  Y ........Set Field to Yes.
      You can quickly move to the       N ........Set Field to No.
      "Cancel" field or "Button" by    Space ....Toggle Field. If
      pressing {ALT}+'C'.                 field is No change To
      {ALT}+O...Move to "OK" Button.         Yes.
      {ALT}+C...Move To "Cancel
            Button.           USING A MOUSE IN A VIEW SCREEN.
                       In a text view screen, scroll
      MOVING TO A FIELD.           down by clicking the downward
      In any Screen, you can move to   arrow of the scroll bar at the
      any other field in the screen    right side of the view screen.
      by moving the mouse cursor to a  Scroll up by clicking the
      field and clicking the mouse       upward arrow.
      button on that field. The           If you click on the
      highlight will move to that       Highlight of the scroll bar or
      field.               "Thumb", and drag the mouse,
                       the screen will scroll.




                       Page 18





      THE MAIN MENU SYSTEM.        -------------------------------
      After NUMERO clears the title    NOTE: You need to be aware of
      screen,  the main menu screen    the level of the menu that you
      is displayed. This screen       are in. There are two menu
      includes a horizontal bar with   levels: The top level and the
      words inside it connected to a   bottom level. When you are in
      box beneath. Beneath the menu    the top level, you must select
      bar is a box. This box is the    a top level entry before
      sub-menu (the horizontal bar is  selecting a bottom level entry.
      the main menu).           Press {ESC} to access the top
         At the bottom of the screen   level menu.
      is a prompt line that is used    -------------------------------
      to remind you of frequently           To select a selected main
      used keystrokes that you can       menu item and enter the sub-
      use at this time.           menu, press    {ENTER} or the
      -------------------------------  {DOWN} cursor key. The
      NOTE: Most of the choices on       highlight moves to the sub-
      the main menu are arranged       menu. You can only get to a
      logically, that is, you need to  sub-menu by selecting a main-
      choose "Enter Data" before you   menu item. The highlight moves
      choose "Compile Chart", and you  to the last sub-menu choice you
      will need to choose "Compile     used last. This makes repeating
      Chart" before you choose the     choices easier.
      "View Print" menu, etc. The           Select the sub-menu item by
      exceptions to this rule is the   using the cursor keys ({UP},
      "Options" and "Utility" menu       {DOWN}, {HOME}, {END}), or by
      items. These are placed near       pressing the key corresponding
      the end because you will use       to the first letter of the
      them less often than the       item. To move to another main
      others.               menu item and its sub-menu, use
      -------------------------------  the {LEFT} or {RIGHT} cursor
         In the main menu screen,       keys.
      select any main menu topic by        If you chose an item by
      either pressing a cursor key       pressing  the first key of the
      ({LEFT}, {RIGHT}, {HOME} or       item, NUMERO automatically
      {END}), or by pressing the key   accepts your choice and starts
      that corresponds to the first    that operation. If you use the
      letter of that item. For       cursor keys you need to press
      example to select "Compile       {ENTER} to choose the item and
      Chart", press 'C'. When you      start the operation. At any
      select an item, the highlight    time, you can get help by
      moves to the item. The sub-menu  pressing the {F1} key.
      changes accordingly.
                       GETTING HELP.
                       As stated earlier, you can get
                       help at any time while you are
                       entering or editing data or you
                       are in a menu system by


                       Page 19





      pressing the {F1} key. When you  to field. It also displays an
      press {F1}, NUMERO searches the  error if you enter the wrong
      help database for related in-    information or your information
      formation on that topic and       is invalid.
      displays it on the screen.           In a data screen, the field
         The help screen shows you       where the cursor is located is
      the purpose, and meaning of a    highlighted, however ,  in
      data entry field or menu item    certain types of fields, the
      and gives you suggestions. At    cursor is not visible. If you
      the bottom of the help screen    are using a color display,  the
      you will see a one or more       fields on the screen are dif-
      highlighted items.           ferentiated from the rest of
         The item displayed in black   the screen, so you can see
      letters on a gray or white       where the fields are. If you
      background is your "cursor",       are using a monochrome monitor,
      and indicates the choice.       the fields will not be dif-
         See help associated with       ferentiated, but the field the
      that choice by pressing the       cursor is no will be in reverse
      {ENTER} key. Move the "Cursor"   video.
      around using the cursor keys
      ({UP}, {DOWN}, {LEFT}, {RIGHT},  MOVING AROUND
      {HOME} and {END}). To go back        You can move from field to
      to a screen you viewed earlier   field using the keys ({UP},
      press the {BACKSPACE} or {<-}    {DOWN}, {TAB}, {SHIFT} + {TAB},
      key.                   and {ENTER}). In addition, the
         To exit help, press the       following keys can help you
      {ESC} key, this returns you to   navigate your way around a
      either the main menu or the       screen:
      screen that you were working in  {CNTRL}+{HOME} Left-Most Field
      last.                {CNTRL}+{END} .Right-Field
         You use data entry screens    {CNTRL}+{PGUP} First Field
      to get information about a       {CNTRL}+{PGDN} Last Field
      person, or the Numerology chart
      that you are working on, or       ENTERING DATA IN FIELDS
      other information. Most entry        To enter data in a field,
      screens are consistent in       select the field and type the
      format and operation. Each       data to be entered.
      screen displays a title at the       In fields that accept a
      top left to indicate the type    limited range of numeric or
      of information that the screen   character values, such as date
      is about.               and time fields, you can't
         At the bottom of the screen   leave that field till you
      is a line of text. This is a       satisfy that field's re-
      prompt;  it gives you valuable   quirements. In most field
      information about what NUMERO    types, move around in that
      expects in each field, and the   field using the cursor keys
      limits of that data. The prompt  ({LEFT}, {RIGHT}).  Some fields
      changes as you move from field   are wider than what is


                       Page 20





      displayed on the screen. If you  -------------------------------
      type in more characters than       NOTE: If you press {ESC} in a
      will fit on the screen, the       birth or date data related
      left part of the field scrolls   screen, you must complete that
      off the screen, but is still in  screen before NUMERO will allow
      the field.               you to compile the chart.
         You can use foreign       -------------------------------
      characters. To use these           To complete a screen, press
      characters, look in your DOS       {F10} or press {ENTER} on the
      manual for the ASCII code.       last field. This tells NUMERO
      Hold down the {ALT} key and       that the screen is complete.
      type the decimal ASCII number    NUMERO then checks that your
      for letter you want in your       data is accurate and ready to
      numeric keyboard.           go.
         In insert mode (indicated           When you complete a date
      by the 1/2 block cursor),       data screen, NUMERO checks the
      characters you type are in-       data that you entered to verify
      serted. Otherwise charactersyou  that the date and time you
      type are overwritten. Delete       entered are valid. For example
      characters with the {DEL} key    if you entered  2/30/ 1980,
      or the {BACKSPACE} ( it may       which would be illegal since
      also be marked {<-}  or {BS}).   February never has 30days.
         Some fields accept a range    NUMERO also knows about leap
      of answers. First press the       years and can determine if a
      Space Bar. Then a list of       given year is a leap year or
      choices will be shown on the       not.
      screen. You can now move the
      highlight with the cursor keys   TEXT VIEW SCREEN.
      or select one using the firs       A text view screen lets you
      letter. Use the Enter Key to       allows you view text like you
      select an entry.           would in a word processing pro-
         In fields that accept a       gram, however you cannot edit
      "Yes" or "No" answer, select       the text.
      the answer by pressing either        Scroll through the text
      'Y', 'N' (in either caps or       using the cursor keys ({UP},
      lower case), or the space bar .  {DOWN}, {PGUP}, and {PGDN}) .
      Leaving/Finishing a Screen.           To instantly reach the end
      At some point, when you are       of the file by pressing the
      using a data screen, you will    {CNTRL}+ {PGDN} keys or reach
      want to either escape from the   the beginning by pressing the
      screen or finish the and       {CNTRL}+{PGUP} keys.
      continue. To escape from the           To search for text press
      screen, press the {ESC} (the       {CTRL} + 'F'.
      escape key on your keyboard).     From a view screen you can
                       access more files. You can open
                       an view as many files as you
                       have memory for.



                       Page 21





         Once you have more than one   {CNTRL}+A .....Find Text Again.
      file on the screen, you can              Use after
      select between them. pressing           {CNTRL}+F.
      {TAB} selects the next file.       {CNTRL}+B .....Find Text
      Pressing {BKSP} selects the              Backwards. Use
      previous file opened.               after {CNTRL}+F.
         To exit this screen, a text   {CNTRL}+F .....Find Text.
      view screen, press the {ESC}       {CNTRL}+O  ....allows you to
      key:                          open an NUMERO
                              text chart to
                              view.







































                       Page 22






                   U S I N G   M A C R O S

      NUMERO UNO provides keyboard macros. Macro files are files that
      contain words or characters that correspond to the keys on your
      keyboard. For example, If you define a macro for the key "F9"
      (known as {FN9}), this macro would be played back each time you
      pressed the {F9} key on your keyboard.
         Keyboard macros affect the entire program equally. The
      default macro file is called N1.MAC. N1.MAC is found in the
      directory from which NUMERO was started from. I have not provided
      any macros right now. As you work with NUMERO, you may discover
      macros that you want to create.

         Each line in a macro file          or {CNTRL}+ key combination.
      is a macro. A macro can be up       Be careful not to redefine
      to 2000 characters long but          an existing function or that
      must not exceed one line. A          function won't be available.
      macro starts with the name for    NUMERO is now in "Learn
      the key followed by a colorn          Mode".
      (':')  followed by the       3. Type the keys you wish to
      keystrokes used. Regular letter     record. Any key you press
      and number keys can't be            will be saved as part of the
      defined as macros. For example      macro you are defining.
      '9' or 'A', can't be defined as       Try to use first letter
      macros, but {ALT}+'A' can be.       menu choices when possible
         To create or modify a macro      as they won't be as specific
      file,  use a file editor which      as if you use cursor keys.
      edits ASCII files.  (If you use    Try not to use the mouse.
      DOS 5.0, use EDIT) The editor    4. Press {ALT}+{F5} again to
      you use must allow you to enter     stop recording the macro, .
      lines longer than 80 characters  5. NUMERO asks you if you wish
      or must allow you to save a          to make the macro permanent.
      file without line breaks          If you answer 'Y' the macro
      Microsoft WordTM will let you       will be saved to the N1.MAC
      do this.                  file. NUMERO writes the
         You can also create macros       macro to a file named for
      as you work. These macros can       the key you pressed. For
      be for a single use, or they          example, if you defined
      can be saved to your N1.MAC          {ALT}+{F9}, the file would
      file to make them permanent.          be named ALTFN9.MAC. If you
         To Use this feature:          defined {SHIFT}+{F4}, the
      1. Press {ALT}+{F5}.              file would be named
      2. NUMERO asks you to press the     SHFTFN4.MAC.
         key you want to define.           If you didn't make the
           You can define any       macro permanent,  but want to
         function key, or {ALT} + key  later, you can use an editor.
                       Edit N1.MAC and merge the macro


                       Page 23





      file into the N1.MAC file. You   1.  Start NUMERO using NUMERO -
      can also load the macro at any      RKB=file.kb.
      time using the Utilities menu    2. Press the keys you want to
      function "Load Macro File".          record.
      -------------------------------  3. Quit the program.
      REGISTER VERSION ONLY        4. Edit this file.
      -------------------------------     A. Take out the keys that
         A utility called             led up to the action  you
      MACKEYS.EXE is supplied with         want a macro for.
      NUMERO, to show you the names       B. Take out the keystrokes
      of keys to which macros are         that allowed you to quit
      defined are. To Use this         NUMERO.
      utility, press various key          C. Take out the line
      combination, and MACKEYS tells     endings.
      you the key name.              D. Put a key name at the
         NUMERO's -RKB= command line         beginning of the macro
      option can be used to record a     along with a colon (':')
      keyboard file. Don't Use your          and you have a macro.
      mouse.                  E. Save your macro.































                       Page 24






            E N T E R I N G   &   E D I T I N G   D A T A

      Use the main menu Item "ENTER/ EDIT DATA" to enter information
      about the names and dates in question and other data. Most of the
      questions asked and information you need to enter is pretty self-
      explanatory. You can get information for each field by pressing
      {F1} or from the prompt at the bottom of the screen. This section
      describes  how to use these screen.
         If you do not want information about an item, leave that
      field of of the data screen blank; it will be omitted from the
      reports.
      ENTER CHART INFORMATION.       birth date will change the
      Use this function to enter the   personality as well.
      primary data that NUMERO uses
      to generate your chart. In this  CALENDAR INFORMATION.
      screen, you will enter your       In this screen, enter the
      Name (both name at birth and       starting and ending date for
      current name). Each part of the  Universal and Personal
      name is entered separately. You  Calendars. You can generate
      will also enter your birth       several calendars in each
      date. You must include the       compilation. These calendars
      century (19 for 1900). The last  are based on data in the "Chart
      field is the Street address.       Information Screen" item
         Try entering different       described above.
      names if you are considering
      changing your name, getting       SAVE DATA TO DISK.
      married, or trying a different       The "Save Data To Disk"
      nick name. For example, if you   item saves the contents of all
      get married and your name       these screens to a disk file
      changes, your numerology chart   for future use. If you do not
      will change, though the change   provide a disk or directory
      will be in addition to the data  name, these files are saved to
      from your name at birth.       your user disk and directory.
         When you enter name, if the       These files are much
      name contains accented       smaller than the files created
      characters, do not enter the       when you compile a chart. If
      characters with accented       you want to save a permanent
      letters. The accented        record, this is a good place to
      characters are ignored, and the  start. It saves all the
      results will be wrong.       relevant information that you
         If you are considering a       need to recreate a chart. If
      name for a child that has just   you save this information and
      been born or is about to be       later compile it will be the
      born,  try different names to    same.
      find a name that you think will
      be harmonious with you and your
      partner. Remember a change of


                       Page 25





      -------------------------------  -------------------------------
      NOTE: If you want to load a set  NOTE: Don't attempt to load any
      of data loaded into your system  file that you did not save with
      each time NUMERO starts up,       Save Data To Disk. You may also
      save the data to the file       load the file N1DAT.DEF or the
      N1DAT.DEF. This should be saved  file N1DAT.HIS.
      to your user disk and        -------------------------------
      directory. The chart you were
      working on last is saved to the  CLEARING DATA SCREENS.
      history file N1DAT.HIS, also in  Use the "Clear Data Screens" to
      the user disk and directory.       clear the data screens if you
      -------------------------------  prefer entering onto a blank
      LOAD SAVED DATA.           data screen. Many users prefer
      The "Load Saved Data" item       to clear the screen before
      loads the data that was       starting a new project, where
      previously saved when you used   others may just to type over
      the "Save Data To Disk" item.    existing data.
      If you don't use a path or
      disk, it will be loaded from
      the user disk and directory.






























                       Page 26






               C O M P I L I N G   C H A R T S

      After you entered your data into the data screens, you can
      compile a Numerology Chart.
         When you compile a chart, Numero displays a screen requesting
      the name and comment information for the file list. This
      information in the list  helps you remember which file to use
      when you want to retrieve it later.
         If you leave Sections of the Chart Info Data screen blank,
      those areas will be omitted from the reports.

      PERSONALITY REPORT.               You can generate a report
      This basic report is based on    for any time period from your
      your birth date and current       birth year to 120 years after
      name, and name at birth. This    your birth. When you compile
      is the report that you will       this report, NUMERO asks you
      want to compile most often.       for the time period for which
      This report is interpreted with  you want a report.
      explanatory text.
                       NUMERIC NAME TRANSITS REPORT.
      NUMERIC REPORT.           This report analyzes the same
      This basic report is also based  data as the Name Transits
      on your birth date, and current  Report, but it provides only
      name and name at birth, but       the numeric data. It does
      this report is not interpreted,  provide the explanatory text.
      and does not contain any           You can generate this
      explanatory text. It contains    report for any period from your
      only has the technical data.       birth year to 120 years after
      This report will be more       your birth. When you compile
      interesting to the serious       this report, NUMERO asks you
      Numerology enthusiast.       for the time period for which
                       you want a report.
      NAME TRANSITS REPORT.        Personal Calendar File.
      This report analyzes the       This item generates a series of
      individual letters in your       Personal Calendars. A Personal
      names. Each letter has a       Calendar is composed of
      vibration that has a particular  Personal Days, a Personal Month
      effect during a certain time       and Year.
      period in your life. The Name        You can generate any number
      Transits Report exlaines these   of these calendars. Each one is
      effects. It also compares the    printed on a separate page.
      vibrations of the letters and    Explanatory text is printed for
      resulting numbers to specific    each number.
      other numbers which appear           These numbers are derived
      during specific years. This       from your birth date and are
      report interprets the data and   unique, though more than one
      provides explanatory text .


                       Page 27





      individual may have the same       them back to your User disk or
      calendar.               directory when you need them.
                       Use the "Scan For Files Not in
      UNIVERSAL CALENDAR FILE.       List" item in the Utilities
      This item generates a series of  Menu to read the files into the
      Universal Calendars. A       list once they have been
      Universal Calendar is composed   copied, or erase the file
      of Universal Days, a Universal   N1FILE.LST from your user disk
      Month and a Year.           or directory and one will be
         These calendars will all be   created.
      the same for any given date,           You can also save data in
      but will be different from one   the data screens to a disk file
      month to another.           and erase the compiled charts
         You can generate any number   at the end of your session.
      of these calendars. Each one is  When you wish to recompile a
      printed on a separate page.       chart, just load the data file
      Explanatory text is printed for  and recompile the chart. NUMERO
      each number.               saves all the data in the
                       screens to one file. These
      KEEPING SAVED FILES.           files are much smaller than the
      If you want to keep reports you  files to which charts are
      have generated, you can store    compiled.
      them on floppy disks and copy



























                       Page 28






         V I E W I N G   &     P R I N T I N G   T H E   R E S U L T S

      NUMERO UNO has several different ways of printing or viewing the
      results. These are available through the "VIEW/PRINT" sub menu
      items. All these menu items rely on the file list. The file list
      is a list of files created by NUMERO in the current session or
      kept from another session. This list can be erased when NUMERO
      ends or can be saved. Every time you compile a chart a new file
      is added to this list. The list is limited only by memory, and
      available disk space on disk to keep the reports until they are
      erased.

         When you view a chart,       Pressing {BKSP} selects the
      NUMERO wraps the text to the       previous file opened.
      width of the display screen and  -------------------------------
      displays it. Text is displayed       NOTE: This function can
      with attributes for highlights.  display a file up to the limit
         This function lets you view   of your available memory.
      the text as if you were using a  -------------------------------
      word processing program,           Exit this screen by
      however, you cannot edit the       pressing the {ESC} key.
      text. You can scroll through       {CNTRL}+A Find Text Again. Use
      the text using the cursor keys         after {CNTRL}+F.
      ({UP}, {DOWN}, {PGUP}, and       {CNTRL}+B Find Text Backwards.
      {PGDN}). Instantly reach the             Use after {CNTRL}+F.
      end of the file by pressing the  {CNTRL}+F Find Text.
      {CNTRL}+ {PGDN} keys or reach    {CNTRL}+O Open a NUMERO text
      the beginning by pressing the          chart to view.
      {CNTRL}+{PGUP} keys.
      -------------------------------  PRINT REPORT.
      MOUSE USERS. You can scroll       The Print Report item lets you
      this screen by clicking down       print out a text report to your
      the  mouse button on the up or   printer or write the report to
      down arrow on the scroll bar.    a disk file for later printing.
         You can also scroll the       Before choosing this option,
      screen by clicking the mouse       you should setup your printer
      cursor over the hightlight on    in the Printer Setup Screen .
      the Scroll Bar at the right           If you haven't set up your
      side of the screen and dragging  printer, you can do so from
      the mouse.               this screen by clicking the
      -------------------------------  Setup Printer button.
         You can open an view as           NUMERO formats the text for
      many files as you have memory    output, using a left margin and
      for. Once you have more than       line width that you set. A
      one file on the screen, you can  header is derived from the file
      select between them. pressing    list information, is printed on
      {TAB} selects the next file.       every page but the first.


                       Page 29





         If you want the header       margins. If you change the line
      printed on the first page,       spacing in the options pick
      select that option in the print  screens, the number of lines
      screen. The output is printed    per page will change.
      using text attributes such as        To print a report, select
      underline and bold (double-       the file that you want to print
      strike) and so on, and is       out from the file list. Press
      directly compatible with Epson   the {ENTER} key to print the
      and IBM Printers, or HP       file. NUMERO displays a screen
      LaserJet or DeskJet. You can       in which you enter information
      configure it for most any type   on how you want the report
      printer. You can also customize  printed.
      to use many features of your           To print the file to your
      printer from the setup screen.   default printer, just leave the
         If you are using a HP       first field blank. The output
      LaserJet DeskJet Printer, or       will be directed to your
      compatible, NUMERO can take       system's current default
      advantage of many cartridge or   printer. To print to your
      internal fonts  as well as any   second printer or LPT2:, enter
      soft fonts you own.           LPT2 in the first field. You
         The pages are broken       can enter any valid DOS device.
      intelligently. If a paragraph        You can also write the
      would spill over onto a new       printout to a disk file. To
      page, Numero prints the entire   direct it to a disk file, enter
      paragraph on the new page,       the file name. If you just
      making the printout easier to    enter the disk file without the
      follow. The resulting printout   directory, the file will be
      can be printed to any legal DOS  saved to the user directory. If
      device. You can also print to a  you enter the full file name
      file for later printing.       starting with the disk name or
         In the Printer Setup screen   the initial '\' root path, the
      you can define a printer       file will be directed to that
      control string. This string is   directory and file name.
      output at the start of the           You can specify the text
      printout to initialize the       width and left margin you want
      printer for such options as       to (in inches). The text width
      print quality, page depth,       can range from 4 inches to 16
      font, line spacing, and other    inches wide. The value  is just
      important data.           the width of the text, not the
         Page depth is also defined    left or right margin. The left
      in the Setup screen is the page  margin can vary from zero to 4
      depth. This is the maximum       inches  wide.
      number of text lines that can        By default NUMERO prints a
      be printed on one page. to       header on every page but the
      determin this number,  you take  first. (Most of the information
      the maximum printable lines on   that the header reflects is
      the paper and subtract five       printed on the first page). You
      lines for the top and bottom


                       Page 30





      can change this to print the       -------------------------------
      header to the first page.       REGISTERED VERSION ONLY
         If you are printing to a       -------------------------------
      printer, you can ignore the       NOTE: When You save files saved
      last field on the screen, and    in WordPerfect format, document
      just press the {ENTER} key on    default information such as
      the last field or {F10} to       printer, default font, or
      print the file. If you are       styles will not be saved to the
      printing to a disk file the       file. This Information is
      last field is important. It       written to the file when you
      tells NUMERO to either append    save it from WordPerfect.
      this printout to an existing           If you want font, printer
      file or to open a new file with  and margin information saved to
      this name. If the file already   the file:
      exists and the file is opened,   1. Convert a file to
      then the existing file is          WordPerfect Format.
      overwritten.               2. Edit the File in
         To cancel the printout          WordPerfect. Format the file
      press the {ESC} key at any time     in WordPerfect so it is
      while the file is being printed     exactly the way you want it.
         If you change the values on   3. Insert at the start  of the
      the Print Report screen, your       text the phrase  ##START##.
      new values will be saved to the  4. Save the file.
      setup file for future use       5. Run the utility program,
      (except the file name which is      WP5TOHED, using the file you
      not saved).                  created and the file name
                          N1DEF.WP5, using the command
      CONVERT REPORT TO TEXT.          line WP5TOHED file N1DEF.WP5
      This Convert Report item lets       {ENTER} (where file is your
      you convert a NUMERO file to          file name).
      other types of files that text    If NUMERO finds a file
      editors or word processing       called N1DEF.WP5, this file is
      programs can use. You might use  used as a header for your file.
      this item to edit the file       WP5TOHED takes a formatted
      before printing.           WordPerfect 5.0 document and
         You can convert a file to       turns it into a header file.
      ASCII, WordStar 3.x or 4.x,       Your report will start where
      WordPerfect 4.x or 5.x,       you inserted ##START## in the
      XYWrite, or  Microsoft Word RTF  document. Everything after that
      (Rich Text) format. You can       is deleted.
      save ASCII and XYWrite files           Files saved in WordStar
      without any soft line breaks.    format do not have any font or
      It is easier to reformat a file  printer setup information
      easier when you read it into       encoded in them. This
      your word processor, because       information is added when the
      there are only paragraph       file is saved to the file when
      breaks.               you save from WordStar.



                       Page 31





      -------------------------------  -------------------------------
      NOTE: Files saved in Microsoft   NOTE: If you change the width,
      Word RTF format will have only   left margin or conversion in
      a default font and a single       this screen, your new values
      Normal Stylesheet paragraph       are saved to the setup file for
      style.               future use.
         Files saved in XYWrite       -------------------------------
      format have no printer, font,
      or setup information encoded in  KILL FILE IN FILE LIST.
      them. You may need to insert a   The Kill File in File List Item
      file into your default document  allows you to kill a NUMERO
      to use it in XYWrite.        text output file. Use this item
      -------------------------------  to erase files on your disk, to
         A file saved with the       make room for other files. This
      "Convert Report to Text" item    is also important if you wish
      is entirely unformatted; it has  to leave files in your file
      no page breaks or headers.       list when you shut down NUMERO,
      However the file is wrapped to   but you do not wish to save all
      the text width you wish, and       the files.
      has a left margin, making it           To use this item, select a
      easier for your word processing  file from the file list. NUMERO
      program to work with.        displays a description of the
         When converting a report to   file you selected. This screen
      ASCII format,  you can you can   Prompts you whether want to
      use one of two different       delete the file. To delete the
      approaches. One is  "Plain       file, Select 'Yes', and press
      ASCII", another is  "Smart       {ENTER}.  If you don't want to
      ASCII". Most people prefer the   delete the file, either select
      "Plain ASCII". Plain ASCII has   'No' or press {ESC} to exit.
      no formatting information. In
      "Smart ASCII", the Text       EDIT FILE IN FILE LIST.
      Attributes are translated into   The Edit File in File List item
      strings that your can change       lets you edit the information
      from the "Word Processing        in the file list. For example
      Conversion Screen".              to change or add a comment.
         This Convert Reort to Text    Note that the file's real file
      item operates almost exactly       name is displayed on the
      like the Print Report function   screen.
      but with a few minor
      exceptions: you need to enter a
      file name in the file name
      field. It won't operate without
      a file name. Second, once the
      printout has begun, you can't
      stop it by pressing the {ESC}
      key. Because the conversion
      takes very little time, this
      should pose no problem.


                       Page 32





      VIEW INTERACTIVE PERSONAL       {HOME}      Go to the first
      CALENDAR                      date of month.
      The View Personal Calendar item  {CNTRL}+{HOME} Go to the
      is an interactive  Personal              starting month.
      Calendar screen you can play       {CNTRL}+{PGUP} Go to the
      with.                       previous year.
         NUMERO prompts you for a       {CNTRL}+{PGDN} Go to the next
      Birth Date and starting date. A          year.
      Personal Calendar is then       VIEW UNIVERSAL CALENDAR SCREEN.
      displayed on the screen. The       The View Universal Calendar
      Personal Days are displayed in   Screen item is the universal
      common calendar format with 7    interactive calendar.
      days across. In each cell or           NUMERO prompts you for a
      box you see the actual date and  birth date and starting date.
      the personal date. The personal  The Universal Calendar will be
      date number is displayed in the  displayed on the screen. The
      upper left of the cell. The       Universal Days are displayed in
      actual date is displayed in the  the common calendar format with
      bottom right.            7 days across. In each cell or
         If you click on the       box you see the actual date and
      personal date with or press       the Universal Date. The
      {ENTER} while a personal date    Universal Date Number is
      is selected, the text that       displayed in the upper left of
      relates to that personal date    the Cell. The actual date is
      is displayed.            displayed in the bottom right.
         You can also use the           If you click on the
      following keys in this screen:   Universal date or press {ENTER}
      {ALT}+M     Show the text       while a Universal date is
             associated with   selected, the text that relates
             the Personal       to that Universal date is
             Month.        displayed.
      {ALT}+B     Show the text           You can also use the
             associated with   following keys in this screen.
             the Personal       {ALT}+M      Show the text
             Year.                  associated with
      {PGDN}     Go to next              the Universal
             month.               Month.
      {PGUP}     Go to previous    {ALT}+B      Show the text
             month.               associated with
      {UP}         Move up 1 cell.          the Universal
      {DOWN}     Move down 1              Year.
             cell.           {PGDN}      Go to next
      {LEFT}     Move left 1              month.
             cell.           {PGUP}      Go to previous
      {RIGHT}     Move right 1              month.
             cell.




                       Page 33





      {UP}         Move up 1 cell.   {HOME}      Go to the first
      {DOWN}     Move down 1              date of month.
             cell.           {CNTRL}+{HOME} Go to the
      {LEFT}     Move left 1              starting month.
             cell.           {CNTRL}+{PGUP} Go to the
      {RIGHT}     Move right 1              previous year.
             cell.           {CNTRL}+{PGDN} Go to the next
                              year.










































                       Page 34






               N U M E R O   U N O   U T I L I T I E S

      This section describes functions and utility programs that you
      can use with NUMERO UNO.
      DOS SHELL.               file) back into the data
      This function lets you to get    screens.
      access to the DOS command line       To use this item, select
      from within NUMERO.           the file you wish to read in.
      -------------------------------  Press {ENTER} the file will be
      NOTE: you will need enough       read.
      memory for the program you wish
      to run and the DOS command       -------------------------------
      interpreter COMMAND.COM.       REGISTERED VERSION ONLY
      -------------------------------  -------------------------------
      To get back to NUMERO type EXIT  FONTINFO.EXE SOFT FONT
      {ENTER}.               INFORMATION.
                       This utility program provides
      SORT FILE LISTING.           the necessary information from
      Use the Sort File Listing item   HP LaserJet Soft fonts. To use
      to sort the file in the file       this utility type FONTINFO
      list                   FONT.SFP {ENTER}, where
          This item sorts the items    FONT.SFP is the font file that
      in the file list on the       you want to use. All soft fonts
      person's name field.             that you can use end in the
                       three letter extension .SFP.
      SCAN FOR FILES NOT IN LIST.
      If you archived files on other   -------------------------------
      disks and now wish to use them   REGISTERED VERSION ONLY
      again, use this item to add the  -------------------------------
      files to the file list.       MAKEDOWN.EXE SOFT FONT DOWNLOAD
      -------------------------------  BATCH FILE MAKER.
      NOTE: You must copy the files    This utility program creates a
      to your User directory before    batch file from your soft font
      using this option.           file names.
      -------------------------------    The first time NUMERO
         This item scans for NUMERO    starts to print out to a
      file headers in all files in       LaserJet type printer, NUMERO
      the User directory.           attempts to start a batch file
         This utility is invoked       called DOWNLOAD.BAT if it
      automatically if NUMERO can't    exists.
      find the file list.            If you change your font
      Read File Into Birth Data.       selection from a font that
      This item lets you to read one   required downloading you should
      of NUMERO UNO's compiled files   erase DOWNLOAD.BAT or create a
      and retrieve the original       new one with this program.
      information (stored in the



                       Page 35






               U S I N G   O P T I O N     S C R E E N S

      Use Option screens to change the setup and defaults that NUMERO
      UNO uses when it creates Numerology Charts. You can also use the
      setup screens to change screen colors, disk and directory
      choices, page length, screen driver, and printer strings.
      SCREEN COLORS.           Printer data files and files
      The Screen Colors Item lets you  for the calendar grid are also
      setup the screen colors. You       found in this directory.
      choose  the four components of
      each screen attribute:       THE USER DIRECTORY is where the
      background color, foreground       charts that NUMERO compiles are
      color, bright, and blink (for    written. If you convert a file
      blinking color). There are       to a text file, or print to a
      seven different screen types.    disk file, NUMERO writes the
         If you are using a        file to the user directory
      monochrome adapter you can only  unless you specify otherwise.
      use the black and white as       When you save and load the
      foreground and background       birth data, NUMERO saves and
      colors, however you can use the  loads from this directory
      bright and blink attributes.       unless you specify otherwise.
         If you are using an LCD
      type system, you can't use the   CALENDAR GRID FILE. When NUMERO
      bright attribute and, depending  compiles Calendars to disk for
      on the capability of your       printing, this file is used to
      system may not be able to use    create the grid. You can change
      the blink attribute .        the name of this file for
                       different effects. Several are
      DISK DIRECTORIES.           supplied, and you can create
      The Disk  Directories item lets  your own custom file. The
      you setup the drives you use       following files  are supplied
      for NUMERO; this is useful if    with NUMERO.
      you are using a hard disk
      system and want to create a       N1CALPRN.1BX--A single ruled
      separate directory for each       border. This is the default.
      type of file, or move NUMERO
      from one drive or directory to   N1CALPRN.2BX--A double ruled
      another on your system.       border
      THE PROGRAM DIRECTORY is where
      NUMERO and the utility programs  N1CALPRN.GRY--A thick gray
      are found. These files end with  border made up of a gray
      .COM or .EXE.            pattern.

      THE DATA DIRECTORY is where the  N1CALPRN.PND--A border made up
      file that produces NUMERO's      of the character #. You might
      text is found.  These files       use this if your printer
      N1TEXT ends in .TXT and .NDX.


                       Page 36





      doesn't support the IBM          with most any printer. In many
      extended character set.       cases however, a driver that is
                       designed for your printer will
      N1CALPRN.ALT--A border made up   be more efficient. The generic
      of the characters '-'. '|' and   driver will work with printers
      '+' . (If you look at this       for which you don't have
      file, you will see the '~'       documentation and printers like
      before the '|'. This keeps the   daisy wheel printers.
      '|' from being interpreted as
      NUMERO's internal tab            COLUMN WIDTH. This is the text
      character.) You might use this   width (in Inches). For example
      one if your printer doesn't      for text 6-1/2 inches wide
      support the IBM extended       enter 6.50.
      character set.
                       LEFT MARGIN. This is the width,
      COUNT W AND Y AS VOWELS?       (in inches)    of the left
      Some numerologists believe that  margin. For example for a1 inch
      the letters  'W' and 'Y' are       left margin, you  would enter
      always considered Vowels for       1.00.
      calculating Inner Self and
      Motivation numbers. Other       LINES PER PAGE. This is the
      believe 'W' and 'Y' are vowels   total number of lines available
      when preceded by vowels such as  on your page,  including top
      in "EW" and "OY".           and bottom margin. A value of
                       66 is appropriate for dot
       O U T P U T     O P T I O N S .   matrix printers printing six
                       lines per inch. A value of 60
      These options control how       is appropriate for laser
      reports  are printed, or       printers.
      converted to text files.
                       PRINT HEAD ON PAGE 1. If this
      PRINTER SETUP SCREEN.        option is turned on, a header
      Use this screen to customize       is printed on page one. If this
      printing and conversion data.    is turned off, no header is
      Included in this screen are       printed on page one.
      information for translating
      attributes in the output files   PRINTING DEVICE. To print to
      to printers and word processing  your default printer leave this
      file conversion.           field blank. For most people
                       this is sufficient. To print to
      PRINTER TYPE. This selects the   your second printer, enter
      printer driver that NUMERO       "LPT2". To print to a specific
      uses. You will see many       device driver, enter the device
      variations of dot matrix       here.
      printers, these allow more
      advanced customization via the   CENTER HEADS. If this option is
      Control Strings screens. The       set to Yes, the main headlines
      generic printer driver  works    are centered on the page.


                       Page 37





      END LINE WITH. This options           Printer control strings are
      lets you indicate what lines on  the commands strings that your
      your printer are ended with.       printer uses for these
      For a laser printer; ignore       attributes as described below
      this field; NUMERO will set it   in the specific Printer Control
      for you. Try to leave this       String field. If you are using
      field the way NUMERO sets it.    a standard printer you don't
      -------------------------------  need to change these.
      NOTE: If, when you print a       -------------------------------
      report, the lines start and end  NOTE:  You can enter ASCII
      erratically,    choose "Line Feed  codes that can't be typed by
      + Carriage Return". If your      typing their ASCII decimal
      printed pages always have more   codes in between '<' and '>'.
      than one line space between       For examole for the escape
      lines, choose "Carriage Return   character that is ASCII decimal
      Only".                           code 27, you would enter <27>.
      -------------------------------  -------------------------------
      COLOR SCHEME. If you use a
      color printer with a color       PRINTER CONTROL STRING. This
      ribbon, and you have specified   string provides the parameters
      a color printer driver above,    the printer requires to start
      in the Printer Type field, you   printing your report. These
      can choose between two       include line spacing, basic
      different color schemes. These   font and print quality.
      color schemes are used for
      printing the Personal and       HEAD ON STRING. This string
      Universal calendar files. The    starts a main heading. By
      following color schemes are       default NUMERO uses bold face
      provided with NUMERO:        and underscored.

      RED/CYAN/BLACK--Numerology       HEAD OFF STRING. This string
      numbers are printed in Red, the  ends a main heading.   This
      calendar days are printed in       must turn off what the Head On
      Cyan. All other information is   String  turned on.
      printed in Black.
                       BOLD ON STRING. This string
      GREEN/MAGENTA/BLACK--Numerology  enables the printer's bold face
      numbers are printed in Green,    or double strike. (With some
      the calendar days are printed    printers this is called
      in magenta. All other        "emphasized text". However, you
      information is printed in       can change this string to a
      Black.               different kind of emphasis
                       other than bold, such as a
      CONTROL STRINGS.           different color.)
      Click on this button to edit
      printer control strings for       BOLD OFF STRING. This string
      your printer setup.           disables the printer's bold
                       face, double strike or


                       Page 38





      emphasized text. This must turn  START CALENDAR STRING. This
      off the command that the Bold    string is output before the
      On String turned on.           calendar starts printing. For
                       dot matrix printers, this
      UNDERSCORE ON STRING. This       should put the printer into
      string enables the printer's     unidirectional movement mode.
      underscore function. However,    If you have proportional
      you can change this to a       spacing enabled in the Printer
      different kind of emphasis,       Setup String, cancel it here.
      such as a different color.
                       END CALENDAR STRING. This
      UNDERSCORE OFF STRING. This       string is output after the
      string must turn off the       calendar is printed. This must
      function enabled in the       disable anything you enabled
      Underscore On String field.       with the Start Calendar String,
                       for example unidirectional
      FIXED PITCH FONT STRING. This    movement mode.
      string makes the printer use a
      Fixed Pitch font. If you       LASER/INK JET SETUP.
      enabled proportional Spacing in  ---------------------------
      the Large Font String (below)    NOTE:  These fields apply only
      or Small Font String (below),    to HP LaserJet,  HP DeskJet, HP
      this must be disabled here.       PaintJet and Canon Laser
         You must cancel anything       drivers
      you setup for the large Font       -----------------------------
      String (below) here as well.       This screen supports five
                       different groups, one for each
      LARGE FONT STRING. This string   font type. These can be
      sets up the printer to print       different fonts and sizes.
      the numerological value for           You can customize the
      each day in the calendar. This   technical information for a
      is only used for calendar       font you have selected by
      printing.               pressing the key noted in the
                       section below.
      SMALL FONT STRING. This string
      sets up the printer to print       MAIN TEXT FONT: This is the
      the actual day numbers printed   main body text font used by the
      in the calendars.           bulk of the report.
         You must cancel anything
      you enable using the Large Font  HEADING FONT: This is the font
      String First before enabling       used folr the heading above
      any special printer functions.   each section of text. This will
                       invoke a bold font, so the font
      PAGE BREAK STRING. If your       used here should refer to a
      printer needs a special string   bold font.
      to be output (for example for a
      special feeder), include it       BIG CALENDAR FONT: This is the
      here.                font used in the calendars for


                       Page 39





      the numbers that represent the   using soft fonts, you will need
      numerological numbers for each   to use FONTINFO.EXE and
      day. This font is usually       MAKEDOWN.EXE to get information
      larger than the rest of the       about your fonts and create a
      fonts used. If you setup a       downloader batch file. See the
      large main heading font, you       section on Utilities to get
      will want to setup this font       information on these utilities.
      large as well. It can be as
      large as 24 points.           SIZE. Some fonts are available
      SMALL CALENDAR FONT: This font   in more than one size. The
      is used on the calendar       fonts you use must support the
      printouts for the actual       font size you select or the
      calendar days. Usually it       printout will not be correct. I
      should be either the size of       don't suggest headline sizes
      the main font or smaller.       larger than 16 points.

      FIXED PITCH FONT: This font is   SYMBOL SET TO USE. If you are
      used to print the calendar       using a HP LaserJet, DeskJet or
      grid. This font must support       compatible, this field lets you
      the DOS extended line drawing    elect the symbol set for the
      characters. On the HP Laserjet   font chosen in the Font name
      it should have a PC-8 Symbol       field above. When you choose a
      Set. This font must be a fixed   font the default symbol set is
      pitch font such as Courier.       selected. The symbol set you
      SPECIFIC FIELDS.           choose must be supported by the
                       font cartridge or font loaded.
      FONT NAME. Use this field to       If you have modified the text
      select the font you wish to use  source for foreign languages
      for your printout. Press {F2}    with accents, or are using the
      or click the mouse button to       Spanish language report
      select a font. NUMERO displays   version, You must be using a
      a list of supported fonts.       font which supports the PC-8
      Press {ENTER} on the line that   symbol set or the characters or
      corresponds to the font.       accents will be incorrect. This
      ---------------------------       does not apply to dot matrix
      NOTE: You must have this font,   printers.
      either as a soft font, on a       -------------------------------
      cartridge or internal font       NOTE:  If you need to support
      before printing. The printout    accents and special foreign
      uses the regular and bold font   characters, NUMERO is able to
      as well as italics (if you       convert between the normal PC-8
      wish).               character set and Roman 8,
         Fonts marked with (DL) will   Windows, ECMA 94, and Ventura
      likely need to be downloaded       International character sets,
      -------------------------------  including changes made by
         If you choose "CUSTOMIZE"       selecting DOS code pages 850
      You will be able to use a font   (Multilingual Latin 1), 863
      not in this screen. If you are   (Canadian French) or 863


                       Page 40





      (Nordic). These are recomended   SYMBOL SET NAME. This is the
      as you will be able to access    technical code name for the
      all the characters in your       symbol set. It must end in a
      computer's character set which   capital letter.
      are in the printer font.
      -------------------------------  REGULAR WEIGHT. This is the
      SYMBOL SET NAME. This is the       weight code for the regular
      technical name for the symbol    weight of the font you want to
      set referred to above. Use this  use. It is usually 0 for a text
      field when you select the       weight or -1 for a light
      "Other Specify -->" symbol set   weight.
      choice, specify the actual
      symbol set code. The symbol set  BOLD WEIGHT. This is the weight
      code you enter here must end in  code for the bold weight of the
      a capital letter.           font you want to use. This is
                       usually three greater than the
      CUSTOM FONT.               regular weight.
      Use this  screen to modify the
      technical parameters used by       AVERAGE CHARACTER WIDTH. This
      laser printers. Donot change       is the average width of a
      any of these parameters unless   single character, in decipoints
      you understand what you are       or 1/10 of a point (a point is
      doing. The program FONTINFO.EXE  1/72").
      can read your soft fonts and           If you can't get this
      provide you with the           information from FONTINFO
      information that you need for    because you aren't using a
      this screen. You can also get    compatible soft font, use a
      information from the           word processor or other font to
      documentation that comes with    use the font you want. Type out
      your fonts.               a line at least five inches
                       wide of upper and lower case
      FONT NAME. This is the name of   letters, (mostly lower case).
      the font. This is for your       Measure the line exactly in
      information only, and is not       inches. Convert this number to
      needed by the printer.       a decimal measure. Multiply
      FAMILY. This is the font family  this number it by 720, and
      number.               divide it by the number of
                       characters in the line.
      PITCH. This is the pitch of a
      fixed font or -1 for a         W O R D   P R O C E S S O R
      proportional font.           C O N V E R S I O N     S E T U P
      SIZE. This is the font size
      that you want to use.        This screen allows you to
      SYMBOL SET. This is the number   customize the way NUMERO
      of the symbol set that NUMERO    converts files to word
      uses in the Laser Setup Screen.  processing and ASCII format.
      This is provided by FONTINFO,    The following strings have no
      or use 12 to enter your own.       effect on word processing


                       Page 41





      conversion other than pseudo
      formatted ASCII conversions.       C O N T R O L   S T R I N G S .
      Conversion. This is your
      default word processing       HEAD ON STRING. This string
      conversion. Pick one that your   marks the start of main heads
      favorite word processor       in the file.
      supports. You can choose from:
      * ASCII (formatted and       HEAD OFF STRING. This string
        unformated)            marks the end of  main heads in
      * XYWrite               the file. This must disable
      * WordStar               what the Head On String turned
      * WordPerfect 4.2 and 5.x       on.
      * Microsoft Word RTF
         If you are using ASCII, you   BOLD ON STRING. This string
      can eliminate the soft line       marks the start of text that is
      breaks and only include  the       emphasized by using bold face
      paragraph breaks in the file.    in the file.
      This should make reformatting
      easier once you load the files   BOLD OFF STRING. This string
      into your word processor.       marks the end of bold face in
                       the file. This must disable the
      COLUMN WIDTH. This is the       command used in the Bold On
      width, in inches. For example,   String.
      a 6-1/2 inch width you would
      enter 6.50.               UNDERSCORE ON STRING. This
         When converting to  certain   string marks the beginning of
      word processors, this value is   underscore or italic text.
      converted based on 10 pitch
      (characters per inch).       UNDERSCORE OFF STRING. This
      ---------------------------       string marks the end of
      NOTE: The file conversion does   underscore or italic text. This
      not concern itself with fonts.   must disable what was enabled
      If you are using a laser       in the Underscore On String.
      printer, you need to set the
      font, provide settings and       FIXED PITCH FONT STRING. This
      reformat the document once you   string tells your word
      are in your word processing       processor to  use a fixed pitch
      program.               font. If you enabled
      -------------------------------  proportional spacing in the
      LEFT INDENT. This is the width,  Large Font String (below) or
      in inches of the left margin.    Small Font String (below), this
      For a 1 inch left margin you       must be diabled here. You
      would enter  1.00.           should disable anything you
          When converting to       enabled with the large Font
      certain word processors, this    String here as well.
      value will be converted based
      on 10 pitch .            LARGE FONT STRING. This string
                       marks where the a larger font


                       Page 42





      should be used for the numbers   PAGE BREAK STRING. If you needs
      in the calendar. This is used    a special string at the end of
      for the numerological value for  the pages, include it here.
      each day in the calendar.
                       START CALENDAR STRING. This
      SMALL FONT STRING. This string   string is output before the
      marks where the a smaller font   calendar starts printing.
      should be used for the days in
      the calendar. This is used for   END CALENDAR STRING. This
      the actual date for each day in  string is output after the
      the calendar. This must disable  calendar is printed. This
      anything that the Large Font       string should disable anything
      String enables first.        enabled with the Start Calendar
                       String.




































                       Page 43





               H A N D L I N G    E R R O R S
      Several different levels of errors can occur when you are using
      NUMERO UNO. If an internal error, such as screen errors that may
      occur. If these occur, please report them to NUMERO UNO technical
      support.

      MINOR DATA ENTRY ERRORS.       that caused the problem. If you
      If you make an error when       see '(A)bort' and select it
      entering data,  NUMERO will       NUMERO quits, without properly
      beep and will prompt you with a  shutting down.
      message in the prompt area.           When you see one of these
      This message tells you about       errors, correct the situation,
      the error.               and make a choice. Make a
                       choice by pressing the letter
      OTHER ERRORS AND WARNINGS.       corresponding to the choice.
      If a minor error occurs while    -------------------------------
      you are using NUMERO UNO, a box  NOTE: You can also press any
      is displayed on the screen and   other key to continue.  If you
      will describe the error to you.  use this option you may need to
      At the top left of that screen,  press the key several times.
      NUMERO displays a title saying   Eventually you will see an
      one of the following: 'A Note    error alert box (which you can
      From NUMERO UNO...' which is an  ignore) and you will return to
      extremely minor situation,       the screen or menu system.
      'Warning!' is a minor situation  -------------------------------
      that you may need to be warned   MEMORY ERRORS.
      about, and 'Error!!' is an       If you run out of memory there
      error situation of a more       are two kinds of errors that
      serious nature.           may occur.      The first is a
                       'Fatal' error. A fatal error
      DOS CRITICAL ERRORS.           will cause NUMERO to shut down
      If a serious system error       immediately.
      occurs, NUMERO beeps, and an           A 'Non-Fatal' error is an
      error message is displayed at    error that NUMERO can recover
      the bottom of the screen.       from, though you will not be
      NUMERO asks you to choose one    able to complete or repeat that
      or more of the following:       operation without additional
      "(I)gnore (R)etry (F)ail         memory. A non-fatal error is
      (A)bort".                        displayed at the bottom of the
         If you see '(I)nore, can      screen much as a 'Critical
      ignore the situation and       Error', in this case you will
      continue. If you see '(R)etry',  be asked to just press any key
      can correct the situation and    to continue.
      retry the operation that caused      Sometimes memory errors
      the error. If you are using DOS  happen because the system's
      3.0 or later you may see       memory has been fragmented,
      '(F)ail', in which case you can  which means it has been broken
      to just fail the DOS operation   into too many little pieces to


                       Page 44





      be used. You can solve this          switch to a new diskette or
      problem by quitting NUMERO and      disk drive.
      restarting the program, or by
      rebooting your system.       NOT ENOUGH FILES IN CONFIG.SYS,
                          YOU NEED AT LEAST 12! Check
      SCREEN ERRORS.              the Installation
      If something goes wrong in one      information. This program
      of NUMERO's screens, an error       requires a minimum of 12
      may occur. These errors are          files in the CONFIG.SYS, but
      Never caused by the user. They      20 is suggested. Your
      are always fatal and should be      CONFIG.SYS file is located
      reported to NUMERO Technical          on your boot disk in the
      Support at your soonest          root or '\' directory. Edit
      convenience, along with your          this file with a word
      system configuration and the          processor that can edit
      events that caused the error to     ASCII format files.
      happen.                Check your DOS manual for
         Many screen errors are          more information regarding
      minor. However, the program          the FILE= entry.
      exits whn it encounters this
      type of error to prevent a           D O S   C R I T I C A L
      problem from continuing to              E R R O R S .
      corrupting the system or DOS.
         After a screen error       DATA CORRUPTED! NUMERO is
      occurs, you can restart the          trying to read or write a
      program. Many of these errors       corrupted or damaged disk,
      happen due to memory              perhaps by a magnetic field
      limitations, and are minor.          or other damage.    Recopy the
         The following section          disk from the original, and
      describes some of the common          try again.
      errors that might occur and
      what can cause them:           DEVICE OR PRINTER OUT OF PAPER
                          OR NOT READY! Your printer
        S Y S T E M   E R R O R S .       might not be turned on, is
                          out of paper, or the device
      FILE OR DIRECTORY DOES NOT          you are printing or writing
         EXIST!  Check to make sure       to such as a modem or
         the directories and files          communication port is not
         that this message refers to      ready to be used, and may be
         exist. Copy the files from       off-line or turned off.
         your master diskette, or
         verify that the information   DRIVE NOT READY! The drive door
         on the setup screen is          is not closed. Close it and
         accurate.                  choose (R)etry.

      NO SPACE LEFT ON DRIVE! Delete   ERROR READING DATA! Your drive
         files on the drive to make       is reporting errors as it
         room, for more files or          reads the data. The data may


                       Page 45





         not be usable. Either       UNKNOWN DRIVE OR UNIT! NUMERO
         reformat this disk or use          is trying to write to a disk
         another one.              or device that does not
                          exist. A system error might
      ERROR WRITING DATA! Your drive      have damaged a device or a
         is reporting errors as it          part of DOS that you are
         writes the data. Either          trying to use. If you are
         reformat this disk or start      sure the disk or device is
         with another one.              present, reboot your system
                          and try again. If it still
      GENERAL FAILURE! A general          is a problem, see a repair
         failure has occurred on this     technician. Make sure you
         disk or device. Try it          are specifying the correct
         again; reboot, try again, or     drive or device.
         see a competent repair
         technician. This error might  UNKNOWN DISK TYPE! Your system
         indicate a bad disk, or a          does not recognize the type
         disk which has not been          of diskette you are trying
         formatted.               to use. For example you
                          might be trying to use a
      TRYING TO WRITE TO WRITE-          1.2M floppy on a 360k
         PROTECTED DISK! Remove the       system, or trying to use a
         disk from the drive and          diskette from another
         remove the write protect tab     computer that uses a
         from the disk if you are          different operating system.
         using a 5-1/4" diskette. If
         you are using a 3-1/2"
         diskette, check the write
         protect tab.





















                       Page 46






          N U M E R O L O G I C A L    V I B R A T I O N S

      This is a Table of the meaning of the Numbers. The text that
      NUMERO UNO prints out is all based on these definitions.

      1. The number of INDEPENDENCE.   6. The number of FAMILY
         This person is a leader,          RESPONSIBILITY. This number
         innovator. outgoing. Deals       deals with relationships,
         with self development. Needs     families and about responsi-
         to learn to be independent.      bility. Needs to learn to
                          willingly accept
      2. The number of COOPERATION          responsibility.
         and FRIENDSHIP. Friendly.
         Basically centered on       7. The number of Learning  and
         dealing with other people in     Deeper Thought. It is a very
         friendships, relationships.      intellectual number. The
         Shy and not outgoing. Needs      person with this number
         to learn to deal with other      should not accept other's
         people.                  beliefs and truths without
                          questioning them.
      3. The number of SELF
         EXPRESSION. Fun to be with.   8. The Number of Business. This
         Outgoing and creative. A          number deals with profes-
         person with this number          sionalism, preparation and
         dresses well. This number is     organization. The person
         related to one's self            with this number needs to
         expression.              learn about  success and
                          failure.
      4. The number of WORK. The
         bedrock of the community.       9. This is the Number of
         This person works hard, and      Selflessness. The person
         may be dull and narrow-          with this number indicates
         minded. Needs to learn to          needs to care about others
         enjoy work.              and love them
                          unconditionally.
      5. The number of FREEDOM and
         EXPERIENCE. Outgoing, and
         creative. This number deals
         with freedom and experience.
         Needs to learn how to deal
         with freedom.








                       Page 47





      11. This Number is  the       22. This number is the Master
         Limelight. A person under          Builder. A person under this
         this influence could be          influence could do anything
         famous. This number suggests     they can dream of, and
         spirituality and              shoule think in terms of big
         inspiration.              projects.
           This is a Master Number.     This is a Master Number.
         If the potential of this          If the potential of this
         number is not dealt with it,     number is not dealt with it,
         will turn into the energy of     will turn into the energy of
         the number 2.              the number 4.







































                       Page 48






                   B I B L I O G R A P H Y



            Campbell, Florence M.A., Your Days Are
             Numbered, A Manual of Numerology for
             Everybody. Marina del Rey, CA: DeVors
             Publications, 1931, 1958.

            Jordan, Juno, Numerology, The Romance in Your
             Name. Marina del Rey, CA: DeVors
             Publications, 1965, 1988, 1978, 1989.

            Roquemore, Kathleen, It's All In Your
             Numbers, The Secrets of Numerology, New
             York, Perennial Library, Harper & Row
             Publishers, 1965.
































                       Page 49